PROJECT CASE

Guangda Electric Is A Professional Organization Dedicated To Solving Power Quality Problems Of Users

How should harmonics be managed in a cigarette factory with multiple variable frequency devices?


Harmonic Control Typical Case 2: (Xuzhou Cigarette Factory) Project Background: Currently, a large number of variable frequency drives (VFDs) are used in the production equipment of cigarette factories. VFDs are typical nonlinear power sources, which leads to a high harmonic content in the current of the power supply system. This significantly increases the harmonic losses in the power supply lines and poses a threat to the safe operation of other electrical equipment. The various departments of the cigarette factory have increasingly clear awareness of energy conservation and consumption reduction, as well as the need to control harmonic pollution. Therefore, harmonic control of the power supply system has become a key project for the cigarette factory. Control Plan: Based on the above situation, our company conducted data analysis from on-site testing and found that the main harmonics of the cigarette factory...


2025-02-13

How to solve harmonic currents in modern communication equipment rooms?


With the rapid development of the communication industry, the scale of communication power supply systems has also been growing, and power supply equipment has become overly concentrated due to continuous expansion. A certain mobile branch company has used multiple sets of UPS and switch power supply systems. UPS and switch power supplies are typical three-phase nonlinear loads. These nonlinear devices generate a large amount of harmonics during use, leading to distortion in voltage and current waveforms, which severely affects the power supply safety of the machine room. Governance plan: In order to eliminate power supply hazards and improve the safety and reliability of AC power supply in the comprehensive building, based on the on-site conditions.


2025-02-13

Beijing Olympic Tram Passenger Transportation Branch


Background of the Harmonic Control Project for Electric Vehicle Equipment at the Beijing Olympic Games Electric Bus Company: The Electric Bus Company of Beijing Public Transport Holdings (Group) Co., Ltd. is located on Beichen Road in Chaoyang District. A new electric vehicle charging station has been established, with a newly installed power equipment capacity of 2903 kW (including chargers, elevators, water pumps, etc.) and optical equipment of 100 kW (including air conditioning, lighting, etc.), resulting in a total capacity of 3003 kVA. The main harmonic-producing equipment is the charger, with each unit rated at 9 kW, totaling 210 units, evenly distributed across two circuits. The charger converts alternating current (AC) to direct current (DC), and its harmonic characteristic is a 6-pulse waveform. Due to the presence of a rectification component (diode rectification), the charger will...


2025-02-13

Shanxi Changzhi Netcom


Typical Case of Harmonic Management in Communication Equipment Room II: (Shanxi Changzhi Telecom) Project Background: In communication equipment rooms, UPS (Uninterruptible Power Supply) has become an indispensable device. The UPS can provide high-quality power with high voltage regulation accuracy, stable frequency, and low waveform distortion to the load. Additionally, it can ensure uninterrupted power supply during static bypass switching. However, since the UPS is a nonlinear load, it generates a large amount of current harmonics, which not only causes harmonic pollution to the power grid but also affects other sensitive equipment in the equipment room, causing significant interference or even harm to the communication system. Therefore, all communication equipment rooms must address the issue of harmonic management.


2025-02-13

Beijing Gaobeidian Wastewater Treatment Plant


Typical Case of Harmonic Control in Wastewater Treatment Plant (Beijing Gaobeidian Wastewater Treatment Plant)\n\nProject Background: The substation load of a certain wastewater treatment plant is mainly composed of 21 frequency converters, which drive corresponding electric motors. The power distribution is as follows: 7 units of 37kW, 7 units of 2.2kW, and 7 units of 1.5kW. Each three units form a group, totaling 7 groups, with each group consisting of 1 unit of 37kW, 1 unit of 2.2kW, and 1 unit of 1.5kW. The system can operate a maximum of three groups simultaneously. Since all loads are frequency converters, they are a significant source of harmonics, leading to severe harmonic pollution and interference in the system.


2025-02-13

Anshan Zhongyou Tianbao Steel Pipe Co., Ltd.


Typical Case of Harmonic Control in Steel Pipe Factory (Anshan Zhongyou Tianbao Steel Pipe Co., Ltd.) Project Background: The main technical parameters of the equipment in the steel pipe factory production workshop are as follows: 1. The power transformers are of the S9 series, with capacities of 1250 kVA and 2000 kVA, primary voltage of 10 kV, and secondary voltage of 0.4 kV. 2. The transformer connection method is Y/Y0. 3. The load of the 1250 kVA transformer consists of two 600 kW medium-frequency heating power supplies, with the main connection using a thyristor three-phase bridge rectifier; fast thyristor single-phase bridge inverter; the energy storage component is a reactor; and the output power frequency is 2.5 kHz. 4. The 200...


2025-02-13

< 1...456...12 >